Best Epoxy For Polyethylene [2022]

Last Update:

Our team studied on 54908 reviews available online for Epoxy For Polyethylene, chose the finest ones and prepared Epoxy For Polyethylene Reviews for you. It was very difficult to shortlist the ideal Epoxy For Polyethylene from thousands of products online. However, We tried to make sure that you get only the Best Epoxy For Polyethylene from our suggestions. Check our listings-:

Comparison Chart for Best Epoxy For Polyethylene

We’ve scanned 54908 reviews for you. If you are looking for the Epoxy For Polyethylene than this review article may help you.

NoProductScoreAction
1J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz9.8Check Latest Price
2Loctite 681925 Super Glue Plastics Bonding System9.8Check Latest Price
3Loctite 1363118-8 Epoxy Plastic Bonder9.8Check Latest Price
4JND Plastic Spray Bottle Fine Mist 4 Oz – Refillable9.8Check Latest Price
5Dynarex 4258 Medicine Cup (Polyethylene)9.4Check Latest Price
6J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml9.2Check Latest Price
7West System 655-8 G/flex Epoxy Adhesive9Check Latest Price
8J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml8.8Check Latest Price
9Loctite Epoxy Plastic Bonder 0.85-Fluid Ounce Syringe (1363118)8.6Check Latest Price
10WEST SYSTEM G/flex Epoxy (2- 4oz)8.4Check Latest Price

Table Of Content:

1. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz

  • J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces.
  • CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI.
  • APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
  • Bonds instantly
  • Superior strength
  • Will not shrink or pull away
  • Rebuild automotive trim, fiberglass parts and vinyl siding

2. Loctite 681925 Super Glue Plastics Bonding System

  • Repairs any plastic guaranteed
  • Quick, neat and easy
  • No mixing required
  • 2 grams
  • Carded
  • Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings.
  • Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas, polycarbonate, polystyrene and PVC.
  • Sets in seconds and dries transparent
  • Easy to apply – no mixing
  • 2-gram tube of bonder with 4mL activator
  • When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 minutes.
  • Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids.
  • It has high impact resistance and can be sanded and drilled.
  • Recommended for bonding substrates such as PVC, polycarbonate, acrylic, ABS, FRP, Nylon, Mylar, Delrin, phenolic, aluminum and stainless steel.

3. Loctite 1363118-8 Epoxy Plastic Bonder

  • Hight Strength Formula: Specially designed acrylic formula bonds, fuses, and repairs a wide variety of plastic surfaces.
  • Double Syringe Design: Conveniently dispenses formula in equal parts to produce a tough, rigid, high-strength bond.
  • Fast & Easy: High-speed bonder sets in just 20-25 minutes for quick repairs
  • Resilient Formula: Resistant to humidity and water, most common solvents, and shop fluids, unique formula does not shrink and has high impact resistance and can be sanded and drilled.
  • Versatile: Ideal for larger household repairs on plastic surfaces, including PVC, polycarbonate, acrylic, ABS, FRP, nylon, Mylar, Delrin, and phenolic, as well as aluminum and stainless steel.

4. JND Plastic Spray Bottle Fine Mist 4 Oz – Refillable

  • MULTI-PURPOSE》Fine mist spray bottle may be used for travel, bathroom, household, kitchen and beauty.
  • TRAVEL SIZE》Compact size of bottle is great for travel.
  • ENVIORNMENTAL FRIENDLY》Bottles are made of high quality materials and HDPE plastic.
  • FINE MIST SPRAY & LEAK PROOF DESIGN》Ergonomic design ensures that bottles have are securely closed and prevents leaking.
  • PACKAGE》Includes 2 empty spray bottles, each bottle has the capacity of holding up to 4 oz.

5. Dynarex 4258 Medicine Cup (Polyethylene)

  • Medicine cup manufactured of strong flexible virgin polypropylene with easy to read graduations.
  • Each sleeve contains 100, 1 oz. Clear medicine cups
  • The perfect size cup to dispense medicinal tablets from or small amounts of liquid
  • See through cup which allows patient and medical personnel to view contents
  • Easy to read gradations
  • included components: 100 Plastic Medicine Cups

6. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe – Translucent Yellow – 25 ml

  • J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl).
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure.
  • STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI.
  • SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

7. West System 655-8 G/flex Epoxy Adhesive

  • EXCELLENT ADHESION adhesion to hard-to bond woods.
  • IDEAL FOR BONDING dissimilar materials.
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins.
  • BONDS MANY MATERIALS including dissimilar ones.
  • MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration.

8. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml

  • J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black.
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

9. Loctite Epoxy Plastic Bonder 0.85-Fluid Ounce Syringe (1363118)

  • Bonder
  • Bonds nylon, polycarbonate, Mylar, PVC, Acrylic, ABS, stainless steel and many other plastics
  • Resistant to solvents, gasoline, diesel fuel and motor Oil
  • Extremely resistant to high humidity, moisture and impact
  • 0.85 oz

10. WEST SYSTEM G/flex Epoxy (2- 4oz)

  • G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
  • G/flex adheres tenaciously to difficult- to-glue hardwoods, both tropical and domestic varieties.
  • G/flex has the ability to glue damp woods.
  • Country of origin: United States

Epoxy For Polyethylene Buying Guide


Does the thought of finding a great Epoxy For Polyethylene stress you out? Has your mind been juggling between choices when it comes to buying Epoxy For Polyethylene in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Epoxy For Polyethylene for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Epoxy For Polyethylene Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Epoxy For Polyethylene in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Epoxy For Polyethylene currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Epoxy For Polyethylene brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Epoxy For Polyethylene based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Epoxy For Polyethylene before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Epoxy For Polyethylene they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Epoxy For Polyethylene, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Epoxy For Polyethylene before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Epoxy For Polyethylene will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Epoxy For Polyethylene if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Epoxy For Polyethylene on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Epoxy For Polyethylene on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Epoxy For Polyethylene featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Add a Comment

Your email address will not be published. Required fields are marked *